Z Series
Crane
The foldable crane loader for easy loading at all times
- Easy loading even near the mast
- Crane made of Weldox 700
- Spherical joint sling bar on base
- Roller bearing on mast rotation with Teflon bushings
- Cast mast hub
- Internal tie-rod to dampen mast tension
- Bolted rod guide on cylinders
- Protective covers on cylinders
- Ground stabiliser control via electrically operated diverter valve (no carry-over system).
The main distinguishing feature of the ‘Z’ series is that the crane, when at rest, is folded behind the cab.
The models in the ‘Z’ range are designed as loaders with a high operating speed and at the same time very robust. This makes them suitable for multiple uses, including working in the forestry sector.
The possibility of installation on the rear overhang of the truck and outreach of up to 9 m make it possible to load tractor and trailer at the same time without having to uncouple the latter.
The dimensions of the arms (with loader at rest) contained within the base frame make them suitable for installation on roll-off containers.
The 1Z1 - 1Z2 models are top sellers and can be installed either on a vehicle or on a roll-off container. The hydraulic extension on the first arm allows the material to be easily loaded close to the column.
Main Features
Standard equipment
Independently controlled hydraulic stabiliser pads
Lever controls
Seat with seat belt and ladder
Tilting ladder with safety devices in accordance with EN 12999:2020
Equipped with ground level controls
with only activating the stabiliser pads and lifting the arm
In-cab display
with sensors for crane position control
Optional
Hydraulic retractable stabiliser supports / pantograph
Rotating stabilising support pads
Joystick control station (Levers + Pedals)
Remote control
High-strength steel / wear-resistant
Cranes suitable for handling scrap, waste and various materials
Log pincers
Hooks for containers
Sludge skip
Model variations
| SERIE Z | Load moment (kNm) | Extension max (cm) | Rotating angle (°) | Extension lifting arm (n) | Extension articulated arm (n) | Articulated arm |
|---|---|---|---|---|---|---|
| C 26.47.1Z | 26 | 470 | 380 | / | 1 | yes |
| C 40.50.1Z | 40 | 500 | 395 | / | 1 | yes |
| C 50.61.1Z | 50 | 610 | 395 | / | 1 | yes |
| CL 60.60.1Z | 60 | 600 | 340 | / | 1 | yes |
| CL 60.60.1Z1 | 60 | 600 | 340 | 1 | 1 | yes |
| CL 80.60.1Z | 80 | 600 | 340 | / | 1 | yes |
| CL 80.60.1Z1 | 80 | 600 | 340 | 1 | 1 | yes |
| CL 100.70.1Z | 100 | 700 | 385 | / | 1 | yes |
| CL 100.72.1 | 100 | 720 | 385 | / | 1 | yes |
| CL 100.72.1Z1 | 100 | 720 | 385 | 1 | 1 | yes |
| CL 100.76.1Z | 100 | 760 | 385 | / | 1 | yes |
| CL 100.80.2Z | 100 | 800 | 385 | / | 2 | yes |
| CL 100.85.2Z | 100 | 855 | 385 | / | 2 | yes |
| CL 120.70.1Z | 120 | 700 | 385 | / | 1 | yes |
| CL 120.72.1Z1 | 120 | 720 | 385 | 1 | 1 | yes |
| CL 120.76.1Z | 120 | 755 | 385 | / | 1 | yes |
| CL 120.80.1Z | 120 | 782 | 385 | / | 1 | yes |
| CL 120.80.2Z | 120 | 770 | 385 | / | 2 | yes |
| CL 120.83.1Z1 | 120 | 825 | 385 | 1 | 1 | yes |
| CL 120.90.2Z | 120 | 900 | 385 | / | 2 | yes |
| CL 140.80.1Z | 140 | 782 | 385 | / | 1 | yes |
| CL 140.83.1Z1 | 140 | 825 | 385 | 1 | 1 | yes |
| CL 140.90.2Z | 140 | 900 | 385 | / | 2 | yes |
| CL 140.91.1Z2 | 140 | 910 | 385 | 1 | 2 | yes |
| CL 160.82.2Z | 160 | 820 | 385 | / | 2 | yes |
| CL 160.95.1Z2 | 160 | 950 | 385 | 1 | 2 | yes |
| CL 165.84.2Z | 135 | 840 | 405 | / | 2 | yes |
| CL 165.85.1Z1 | 135 | 850 | 405 | 1 | 2 | yes |
| CL 165.97.1Z2 | 135 | 970 | 405 | 1 | 2 | yes |
| CL 180.80.2Z | 180 | 770 | 385 | / | 2 | yes |
Request more information
"*" indicates required fields